Home > News

The Way To Clean License Plate Of Your Vehicle

Jul. 29, 2021

The Way To Clean License Plate Of Your Vehicle

Cleaning the car by hand is an excellent way to thoroughly clean the appearance of the car, but don't forget to give the license plate the fun it deserves. Here is the correct way to clean up the license plate to make it look new.

Collect suitable tools and objects

Before you start cleaning your license plate (or plate, if your state of residence calls for 2), make sure you have everything you need to do the job. License plate supplier recommends complying with items: sponge, screwdriver or wrench, cleaning cloth, car wax, oil glue, comfortable soapy water, insect solvent, and self-adhesive label solvent.

License plate frame

License plate frame

Remove the license plate

Use a screwdriver or wrench to remove the screws or bolts that secure the license plate of the car. In addition, if there is a licensing framework, you will want to eliminate the licensing framework.

Soak the plate and scrub

Soak the license plate in a container filled with warm soapy water for about 10 minutes. Next, use a sponge to scrub the sides of the home plate. If you need some help to remove deposits from the old stickers or bug splatters, you can try using sticker label solvent or insect solvent.

If there is a license plate structure, use soapy water to clean it. (If it remains in poor form, replace it with a brand new one or without a frame.) Then use a clean cloth to dry the license plate and structure.

Use wax

After the home plate is completely dry, apply car wax on both sides. Let it dry completely, then polish the surface area. This protective layer will make it easier to clean the dishes from dust or insects, built up throughout the drive. Similarly, it also helps protect the home plate from rust and damage caused by direct ultraviolet radiation.

Put the plate back on

Before you put the license plate back on, check the bolts or screws to make sure the head is not peeling or rusting. If necessary, replace these bolts with new ones.

Apply ordinary oil on the bolts, and then use a screwdriver or wrench to re-fix the home plate to the car. This product will help reduce rust and make it easier to remove the plate for cleaning in the future.

The front license plate may not need foam pads if the front license plate has a special license plate holder attached to the bumper. Always test the placement location before connecting.

We are license plate frame suppliers. Please feel free to contact us if you are interested in our license plate frame or other problems.


Name: Zhang Wanshuai

Tel.: +86 577 6526 9700

Mobile: +86 152 0577 2515

Email: chepaijia@aliyun.com

Skype: +86 152 0577 2515

Address: A12, Standard Factory Building, Dongcun, Hai'an Town, Tangxia Town, Ruian City, Zhejiang Province

Copyright © Rui'An XingChang Autoparts Co., Ltd. All Rights Reserved | Sitemap | Technical Support: